>Back
to : Home > Products > Respirator
set / Options
Paint
Spray Set <Model G-7>
Organic vapor
cartridge for painting and high performance
particulate filter for mist/dust removal are
supplied with chemical cartridge respirator
G-7.
Fit testing device to
ensure airtight seal between face and facepiece.
Type L= KGC-1 series.
Type M= KGC-10 series
Type J = KGC-5MC, KGC-10MC,KGC-10EOG
Pre-Filters
High performance pre-filter that captures toxic mist
generated during urethane painting.
Mighty Micron Pre-Filter
Type 1
=
KGC-1L series, KGC-1S series.
Mighty Micron Pre-Filter
Type 10
=
KGC-10 series.
Pre-Filter Retainer
(option) is required to install Pre-Filter. Pre-Filter
cannot be installed on some cartridges.
Paint Spray
Chipper
Paint Spray Chipper Type 1M
=
KGC-1M (C)
Paint Spray Chipper Type 10
=
KGC-10 series
Pre-Filter/ Chipper Retainer (option) is
required to install Paint Spray Chipper
Type P.
Retainers
Device to install Pre-Filter on cartridge.
Pre-Filter Retainer Type 1
= KGC-1L
series, KGC-1S series
(This product can be used only as filter).
Pre-Filter/Chipper Retainer Type 10
=
KGC-10 series
Moisture Guard (Including Sponge Type
B).
Water-drop
preventing device,
installed on chemical cartridge
respirator Model G-7. Highlyabsorbent
sponge can be installed on
the respirator with cover. An easy-toinstall,
compact type that does not
interfere visual angle.
Sponge Type
A
Sponge Type A is placed inside the bonnet-style
facepiece enclosure. It is designed to effectively
absorb
the water drop accumulated inside the facepiece and
prevent the wearter from feeling discomfort.
Ethylene
Oxide (EOG) Set <Model G-7>
Silicone facepiece chemical cartridge respirator
set for removal of toxic
ethylene oxide gas generated in medical facilities
and chemical
factories.
Contents
Chemical Cartridge
Respirator : Model G-7 / 1pc
Cartridge
: KGC-10EOG / 1pc
Formaldehyde
Set <Model G-7>
Silicone facepiece chemical cartridge respirator
set for removal of
toxic formaldehyde gas.
